Your position: Home > Solar Motion Light

ZH-M32 3.5W Solar Power Pir Sensor 32 LED Light Home Garage Municipal Walls Lamp

Item Code: EBC355
Sold: 26
    Please select the information you wantX
Wholesale Price:
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
Units 9999 in Stock
  • Description
100% Brand new!
Smart and energy saving solar PIR sensor control LED lights.
Automatic switching on when detecting people approaching and automatic power off or dimming when detecting people left.
The lamp can illuminate the way for you at night, also a safeguard tool which can threaten bad guys by sudden burst.
It works in a 120 degree angle and detects motion up to 2-3 meters away.
With polysilicone solar panel, can convert solar energy into electricity, no need of outside power, energy efficiency and environmental protection, can work up to 8 hours if fully charged.
We will send you screws and screwdriver(as a gift), which will facilitate your installation.
Built-in 32pcs high quality 2835 beads, bright without increasing electricity bill.
Using 2pcs high volume 18650 batteries as the power bank, can store more electricity under the solar system.
It is widely used for illumination in outdoor, courtyard, balcony, wall, street, garden, plaza, entrance, etc.
Material: Safe ABS
Color: Black
Sensor sensitivity: 2~3m / 120 degrees
Solar panel power: 5.5V, 2.2W, 17 percent efficiency
Built-in lithium battery: 3.7V, 4400mA
Beads: 32pcs 2835 LED, 3.5W

Luminous: About 550lm 
Color temperature: Cool white, 6000 - 6500K
Delay time: 10 seconds
Night sensor: Less than 10Lux
Charging time: 6~8 hours

Working time: 6~8 hours
Waterproof: YES, IP65
Lighting modes: Off / Light control / Motion+dimming / Motion sensor
Size: About 21x12x7.5cm / 8.27x4.72x2.95"
How to use
1.Unlock and activate the device
The internal battery is locked for safety shipment, so users have to remove 2 screws to open the battery case, choose one mode before you hang it.
2.Install the device
Please use the supplied screw sleeves and screws to mount the device on wall or somewhere else you want for lighting.
3.Charging via solar panel
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass. Normally it can be fully charged in one day under ideal bright sunlight.
4.Modes selection
Mode A: Photosensitive control, auto off in day and charging via the solar panel, auto on at night, the brightness is just half of motion sensor mode.

Mode B: Motion sensor + dimming, when people or something reaching the sensing area, the light will be on, and shift to dim when people left the introduction area.
Mode C: Motion sensor, the light will turn on when sensing people, and turn off after people leave.

1.Keep the device away from fire. 
2.Please fully charged the device before first use, for about 6~8 hours.
3.If there is no good sunlight in 3 months, the battery may be out of power, so you have to charge it by bright sunlight.
4.If there is no good sunlight or in winter sunlight, especial in north corners, it may take longer time to fully charge the device and this is very normal for solar products.

Package Included
set 1 X Solar Powered Lamp
2 X Expansion Pillar-hinge
2 X Mount Screws
1 X Screwdriver
1 X User Manual

Customer Reviews
Average rating:

Share your thoughts with other customers